Common Mac Acl Commands - Dell Z9500 Command Reference Manual

Common MAC ACL Commands

The following commands are available within both MAC ACL modes (Standard and Extended) and do not
have mode-specific options. These commands allow you to clear, display, and assign MAC ACL
configurations.
The Z9500 supports both Ingress and Egress MAC ACLs.
You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in
the ACL determine how traffic on an interface, VLAN members, or port-channel members is handled.
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
Z9500
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
274
(OPTIONAL) Enter the name of a configured MAC access list.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Access Control Lists (ACL)