show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL,
Layer 3 ACL, and IPv4Flow).
Syntax
show cam-usage [acl | router | switch]
Parameters
acl
router
switch
Command
•
Modes
•
Command
Version 9.5.
History
(0.0)
Version 9.3.
(0.0)
Usage
The following regions must be provided in the show cam-usage output:
Information
•
•
•
The following table describes the output fields of the show cam-usage command.
Field
LineCard
Portpipe
CAM-Region
Total CAM space
270
(OPTIONAL) Enter the keyword acl to display Layer 2 and
Layer 3 ACL CAM usage.
(OPTIONAL) Enter the keyword router to display Layer 3
CAM usage.
(OPTIONAL) Enter the keyword switch to display Layer 2
CAM usage.
EXEC
EXEC Privilege
Introduced on the Z9500.
Introduced on the S4810, S4820T, Z9000 and MXL.
L3AclCam
L2AclCam
V6AclCam
Description
Number of the line card that contains
information on ACL VLAN groups
The hardware path that packets follow
through a system for ACL optimization
Type of area in the CAM block that is
used for ACL VLAN groups
Total amount of space in the CAM
block
Access Control Lists (ACL)