Extreme Networks ExtremeWare Command Reference Manual page 685

configure log filter set severity match
source ipaddress 10.1.2.0/24
Using the single command eliminates the possibility of missing an event of interest between the
separate and commands.
delete add
See the command on page 775 for a detailed description of severity levels.
show log
To see the current configuration of a target, use the following command:
show log configuration target {console-display | memory-buffer | nvram | session |
syslog [<host name/ip> {: <udp-port>} [local0 ... local7]]}
To see the current configuration of a filter, use the following command:
show log configuration filter <filter name>
Example
To change the severity level of the filter item added with this command:
configure log filter bgpFilter2 add events bgp.keepalive severity notice
use the following command:
configure log filter bgpFilter2 set severity info events bgp.keepalive
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 685