Show Security-Profile - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show security-profile

show security-profile {<name>}
Description
Displays the configured parameters of the security profile.
Syntax Description
name Specifies the name of an existing security profile whose parameters need to be displayed.
Default
All
Usage Guidelines
Use this command to show security profiles currently configured on the platform and all values
associated with each security profile. If no security profile name is entered, configuration parameters are
displayed for all security profiles.
Examples
The following command displays the security profile configuration for all profiles:
show security-profile
The output of the command is similar to:
Profile Name:
ESS Name:
Dot11 Authentication:
Network Authentication:
Encryption:
User VLAN:
Use Dynamic VLAN:
SSID in Beacon:
Interfaces:
1054
Unsecure
fz-unsecure
open
none
none
Default
yes
on
180
1:1:2, 1:2:2, 1:3:2, 1:4:1, 1:4:2,
1:4:2, 1:5:1, 1:5:2, 1:5:2, 1:6:1,
1:6:2, 1:6:2, 1:7:1, 1:7:2, 1:7:2,
1:8:1, 1:8:2, 1:8:2, 1:9:1, 1:9:2,
1:9:2, 1:10:1, 1:10:2, 1:10:2, 1:11:1,
1:11:2, 1:11:2, 1:12:1, 1:12:2, 1:12:2,
1:13:1, 1:13:2, 1:13:2, 1:14:1, 1:14:2,
1:14:2, 1:15:1, 1:15:2, 1:15:2, 1:16:1,
1:16:2, 1:16:2, 1:17:1, 1:17:2, 1:17:2,
1:18:1, 1:18:2, 1:18:2, 1:19:1, 1:19:2,
1:19:2, 1:20:1, 1:20:2, 1:20:2, 1:21:1,
1:21:2, 1:21:2, 1:22:1, 1:22:2, 1:22:2,
1:23:1, 1:23:2, 1:23:2, 1:24:1, 1:24:2,
1:24:2, 1:25:1, 1:25:2, 1:25:2, 1:26:1,
ExtremeWare 7.5 Command Reference Guide