Show Ports Packet - Extreme Networks ExtremeWare Command Reference Manual

show ports packet

show ports {mgmt | <portlist>| vlan <vlan name>} packet
Description
Displays a histogram of packet statistics.
Syntax Description
mgmt
portlist
vlan name
Default
N/A
Usage Guidelines
If you do not specify a port number or range of ports, a histogram is displayed for all ports.
On a modular switch,
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
This status information may be useful for your technical support representative if you have a network
problem.
The following packet statistics are displayed:
• port number
• link status
• packet size
Example
The following command displays packet statistics for ports 1 through 6 on a stand-alone switch:
show ports 1-6 packet
Receive Packet Statistics
Port
================================================================================
1
2
3
4
5
6
Sun Sep 12 14:48:40 2004=======================================================
ExtremeWare 7.5 Command Reference Guide
Specifies the management port Supported only for switches that provide a management port, such
as the Summit 400.
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:*, 2:5, 2:6-2:8.
Specifies a VLAN name.
can be a list of slots and ports. On a stand-alone switch,
<portlist>
Link
Status 0-64 65-127
A 410465 3548292
A 397578 1724578
R 0
A 394646 2485133
A 394141 2439441
A 394741 2099487
Packet Sizes
128-255 256-511 512-1023 1024-1518
97395 51257
94290 49422
0 0 0
102640 52893
89201 49095
67017 40001
Sun Sep 12 14:48:59 2004
7390 1547785
10469 2491883
0 0
5945 1537346
4141 1532115
4143 2540292
show ports packet
<portlist>
Jumbo
0
0
0
0
0
0
333