SLB Commands—"i" Series Switches Only
configure flow-redirect add next-hop
configure flow-redirect <flow redirect> add next-hop <ip address>
Description
Adds the next hop host (gateway) that is to receive the packets that match the flow redirection policy.
Syntax Description
flow redirect
Specifies a flow redirection policy.
ip address
Specifies an IP address.
Default
N/A
Usage Guidelines
This command also automatically enables ping-based health checking.
Example
The following command adds the next hop of 10.2.1.20 to the flow redirection policy named
"http_flow":
configure flow-redirect http_flow add next-hop 10.2.1.20
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all "i" series platforms.
494
ExtremeWare 7.5 Command Reference Guide