Configure Debug-Trace Rip-Route-Change - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace rip-route-change

configure debug-trace rip-route-change <debug level> vlan <vlan name | all>
Description
This command is not currently supported.
Syntax Description
debug level Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
1182 ExtremeWare 7.5 Command Reference Guide