Extreme Networks ExtremeWare Command Reference Manual page 426

FDB Commands
Total: 33 Static: 16 Perm: 0 Locked: 0 Secure: 0 Dynamic: 17 Dropped: 0
Questionable: 0 Remapped: 0
FDB Aging time: 300 seconds
NOTE
IPX information only shows in "i" series switch output.
The following command displays information about the permanent entries in the FDB:
show fdb permanent
It produces output similar to the following:
EQP IQP Index
--------------------------------------------------------------------------------
QP3 QP2 ----- --- 00:10:E3:1D:00:05
QP3 QP2 4e610-206 00:01:03:2F:38:EE
QP3 QP2 ----- --- 00:60:B0:F9:58:9D
Flags: (B) Egress Blackhole, (b) Ingress Blackhole, (d) Dynamic, (s) Static
(p) Permanent, (m) MAC, (S) secure MAC, (l) lockdown MAC, (M) Mirror
(i) IP, (x) IPX, (z) translation MAC, (Q) Questionable, (R) Remapped
[ ] : authorize port list
Total: 3 Secure: 0
NOTE
IPX information only shows in "i" series switch output.
History
This command was available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.2.1 to support the
This command was modified in ExtremeWare 6.2.2b108 to support the
The option was not supported in ExtremeWare 7.0.
remap
This option is supported in ExtremeWare 7.1.0.
remap
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
426
Mac Vlan
anntest1(4094) pm
anntest1(4094) spm
Default(0001) pm
Flags Port List
---
---
---
option.
broadcast-mac
option.
remap
ExtremeWare 7.5 Command Reference Guide