Configure Ssl Privkey Pregenerated - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure ssl privkey pregenerated

Obtains the pre-generated private key from the user.

This command is available only for the Alpine 3800 and Summit 300 series switches.

Syntax Description

This command has no parameters or variables.

Usage Guidelines

This command is also used when downloading or uploading the configuration. Because the private key

is stored in the uploaded configuration file in an encrypted format using a hard-coded passphrase, you

should not modify the private key information in the configuration file.

The certificate and private key file should be in PEM format and generated using RSA as the

cryptography algorithm.

The following command obtains the pre-generated private key from the user:

configure ssl privkey pregenerated

Next, the user will open the certificate and then file, copy, and paste the certificate into the

console/telnet session, followed by a "." (period) to end the command.

This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e and to the "i"

series in 7.3.0.

Platform Availability

This command is available in all platforms that use the SSH image except for the Summit "i" platform

switches that use the SSH Base image.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5