Enable Web - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

enable web

enable web {access-profile [<access_profile> | none]} {port
<tcp_port_number>}
Description
Enables ExtremeWare Vista web access to the switch.
Syntax Description
access profile
none
port
Default
Enabled, using TCP port 80.
Usage Guidelines
By default, web access is enabled on the switch.
For version 6.0 and higher:
• By default, web access has no access profile and uses TCP port number 80.
• Use an access profile to restrict ExtremeWare Vista web access. An access profile permits or denies a
named list of IP addresses and subnet masks. You must create and configure an access profile before
you can use this option. You create an access profile using the
command. You configure an access profile using the
an access profile only when ExtremeWare Vista is enabled.
• Use the option to cancel a previously configured access-profile.
none
• Use the option to specify a TCP port number.
port
Example
The following command applies the access profile administrators to the web:
enable web access-profile administrators
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.0 to include the access profile and port options.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
210
Specifies an access profile. (6.0, 6.1)
Cancels a previously configured access profile. (6.0, 6.1)
Specifies a TCP port number. (6.0, 6.1)
configure access-profile
create access-profile type
command. Apply
ExtremeWare 7.5 Command Reference Guide