Enable Slb L4-Port - Extreme Networks ExtremeWare Command Reference Manual

enable slb L4-port

enable slb L4-port [ftp | http | https | imap4 | ldap | nntp | pop3 | smtp
| socks | telnet | tftp | web | wildcard | www | <TCP or UDP port number>]
Description
Enables an SLB port.
Syntax Description
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
Layer 4 ports are enabled by default.
Usage Guidelines
To disable a layer 4 port, use the following command:
disable slb L4-port
Example
The following command enables SLB for FTP ports:
enable slb L4-port ftp
History
This command was first available in ExtremeWare 6.1.
ExtremeWare 7.5 Command Reference Guide
Specifies an FTP node.
Specifies an HTTP node.
Specifies an HTTPS node.
Specifies an IMAP4 node.
Specifies an LDAP node.
Specifies an NNTP node.
Specifies a POP3 node.
Specifies an SMTP node.
Specifies a SOCKS node.
Specifies a telnet node.
Specifies a TFTP node.
Specifies a Web node.
Specifies any port associated with a wildcard server.
Specifies a www node
Specifies a TCP or UDP port for the node.
enable slb L4-port
617