Show Slb Node - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

show slb node

show slb node {<ip address> [ftp | http | https | imap4 | ldap | nntp |
pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP
port number>]}
Description
Displays node configuration and status.
Syntax Description
ip address
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
N/A
Usage Guidelines
If you do not specify a node, status for all nodes is displayed.
Example
The following command displays the current node configuration and statistics for all nodes:
show slb node
Following is the output from this command:
IP
Node IP Address Flags
1.111.1.1 E--H--
1.111.1.2 E--H--
1.111.1.3 E--H--
644
Specifies an IP address.
Specifies an FTP node.
Specifies an HTTP node.
Specifies an HTTPS node.
Specifies an IMAP4 node.
Specifies an LDAP node.
Specifies an NNTP node.
Specifies a POP3 node.
Specifies an SMTP node.
Specifies a SOCKS node.
Specifies a telnet node.
Specifies a TFTP node.
Specifies a Web node.
Specifies any port associated with a wildcard server.
Specifies a www node
Specifies a TCP or UDP port for the node.
Freq/ TCP/UDP
Timeout Port Flags
10/30 80 E---
10/30 80 E---
10/30 80 E---
Frequency/Max
Timeout#PoolsConns
30/90 2(no limit)
30/90 2(no limit)
30/90 2(no limit)
ExtremeWare 7.5 Command Reference Guide