Clear Slb Connections - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

clear slb connections

clear slb connections {ipaddress <ip address> : <port> | vip <vip name>}
Description
Clears all existing SLB connections.
Syntax Description
ip address Specifies an IP address.
port Specifies a port.
vip name Specifies a virtual server.
Default
N/A
Usage Guidelines
If you do not specify an IP address or a virtual server, all connections are cleared.
This command interrupts all current connections, but does not prevent new connections from being
established. To prevent new connections from being established, disable SLB to each virtual server using
the following command:
disable slb vip <vip name> all
To prevent new connections from being established to a specific virtual server and simultaneously close
all current connections, use the following command:
disable slb vip <vip name> all close-connections-now
Example
The following command clears the connections to the virtual server "content":
clear slb connections content
History
This command was available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
492 ExtremeWare 7.5 Command Reference Guide