Disable Log Debug-Mode - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Status Monitoring and Statistics

disable log debug-mode

Disables debug mode. The switch stops logging events of severity debug-summary, debug-verbose, and

Syntax Description

This command has no arguments or variables.

Usage Guidelines

This command disables debug mode. Debug mode must be enabled before logging debug messages,

which can severely degrade performance. For typical network device monitoring, debug mode should

remain disabled, the default setting. Debug mode should only be enabled when you are advised to do

so by technical support, or when advanced diagnosis is required. The debug mode setting is saved to

The following command disables debug mode:

disable log debug-mode

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5