Show Snmpv3 Target-Addr - Extreme Networks ExtremeWare Command Reference Manual

show snmpv3 target-addr

show snmpv3 target-addr {{hex <hex value>} | <addr name>}
Description
Display information about SNMPv3 target addresses.
Syntax Description
hex
addr name
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 snmpTargetAddressTable. If no target address is
specified, the entries for all the target addresses will be displayed.
Example
The following command displays the entry for the target address named tgtaddr1:
show snmpv3 target-addr tgaddr1
Output of the command is similar to:
Target Addr Name : tgtaddr1
TDomain
TAddress
TMask
Timeout
Retry Count
Tag List
Params
Storage Type
Row Status
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies a string identifier for the target address.
: 1.3.6.1.6.1.1
: 10.36.11.187, 162
:
: 1500
: 0
: defaultNotify
: param1
: NonVolatile
show snmpv3 target-addr
237