Commands for Configuring Slots and Ports on a Switch
Slot 6 information:
State:
HW Module Type:
Configured Type:
Slot 7 information:
State:
HW Module Type:
Configured Type:
Slot 8 information:
State:
HW Module Type:
Configured Type:
Example 2—Stack of Switches
The following example shows slot information for a stack of switches:
* Stk Master:13 # show slot
Slot 1 information:
State:
Serial number:
HW Module Type:
Master:
Primary EW Ver:
Secondary EW Ver:
Image Selected:
Image Booted:
Config Selected:
Config Booted:
Primary Config:
Secondary Config:
Configured Type:
Inline-power:
Total Common:
Consumed:
UTP ports available:
Link Active:
Link Down:
348
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
Empty
Empty
Not configured
Empty
Empty
Not configured
Empty
Empty
Not configured
Operational
--
S400-24P
00:04:96:1F:A7:3A
7.4e.0.28 [non-ssh]
7.4e.0.10 branch-McastExtn_v74e0b10-r2 [non-ssh]
Primary
Primary
Primary
Primary
Created By EW Version: 7.4.0.26
Empty
Not configured
376W
0.0W
[26]
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
[25]
ExtremeWare 7.5 Command Reference Guide