Configure Radius Shared-Secret - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure radius shared-secret

configure radius [primary | secondary] shared-secret {encrypted} [<string>]
Description
Configures the authentication string used to communicate with the RADIUS authentication server.
Syntax Description
primary Configures the authentication string for the primary RADIUS server.
secondary Configures the authentication string for the secondary RADIUS server.
encrypted Indicates that the secret should be encrypted.
string The string to be used for authentication.
Default
Unconfigured
Usage Guidelines
The secret must be the same between the client switch and the RADIUS server.
The RADIUS server must first be configured for use with the switch as a RADIUS client.
If the server address is not specified, it configures shared-secret for all configured primary and
secondary RADIUS authentication servers.
You must configure the RADIUS server first before configuring the shared secret for a specific server.
Example
The following command configures the shared secret as "purplegreen" on the primary RADIUS server:
configure radius primary shared-secret purplegreen
History
This command was first available in ExtremeWare 4.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
872 ExtremeWare 7.5 Command Reference Guide