Unconfigure Radius - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

unconfigure radius

unconfigure radius {server [primary | secondary] {[<host name> |
<ipaddress>]}}
Description
Removes the RADIUS client configuration.
Syntax Description
primary Unconfigures the primary RADIUS server.
secondary Unconfigures the secondary RADIUS server.
ipaddress Specifies the IP address of the server being unconfigured.
hostname Specifies the host name of the server being unconfigured.
Default
Unconfigures both the primary and secondary authentication servers.
Usage Guidelines
None
Example
The following command unconfigures the secondary RADIUS server for the client:
unconfigure radius server secondary
History
This command was first available in ExtremeWare 4.1.
This command was added to the Summit "e" series of switches in 7.1e.
Platform Availability
This command is available on all platforms.
1082 ExtremeWare 7.5 Command Reference Guide