Configure Slb L4-Port - Extreme Networks ExtremeWare Command Reference Manual

configure slb L4-port

configure slb L4-port [ftp | http | https | imap4 | ldap | nntp | pop3 |
smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP port
number>] [treaper-timeout <seconds> } udp-idle-timeout <seconds>]
Description
Configures the inactive period for TCP or UDP before the connection is aged out.
Syntax Description
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
treaper-timeout
udp-idle-timeout
Default
The default treaper-timeout is 600 seconds.
The default udp-idle-timeout is 600 seconds.
Usage Guidelines
You must configure the port and add it to a pool before you use this command. The timeout value
affects all connections to the specified service on all virtual servers.
To set the timeout values for a wildcard virtual server, use a TCP or UDP port number of 0.
Example
The following command configures the ftp nodes with a TCP idle period of 30 seconds:
configure slb l4-port ftp treaper-timeout 30
ExtremeWare 7.5 Command Reference Guide
Specifies the FTP service.
Specifies the HTTP service.
Specifies the HTTPS service.
Specifies the IMAP4 service.
Specifies the LDAP service.
Specifies the NNTP service.
Specifies the POP3 service.
Specifies the SMTP service.
Specifies the SOCKS service.
Specifies the telnet service.
Specifies the TFTP service.
Specifies the Web service.
Specifies any port associated with a wildcard server.
Specifies the WWW service.
Specifies a TCP or UDP port for the service.
Specifies the timeout for TCP.
Specifies the timeout for UDP.
configure slb L4-port
545