Commands for Status Monitoring and Statistics
show flowstats export
show flowstats export [ detail |{<group number> detail} ]
Description
Displays configuration information an export group.
NOTE
This command is available only on the "i" series switches.
Syntax Description
group number
Specifies a group number for which configuration information should be displayed.
Default
N/A
Usage Guidelines
The information displayed by this command is displayed in a format similar to the
configure
command. The following information is displayed:
flowstats export
• Whether the flowstats feature is enabled or disabled
• The configuration of flow-collector devices for the export group (
)
NetFlow Server Config
• NetFlow ping-check configuration
Example
The following command displays detailed configuration information for export group 1:
show flowstats export 1 detail
Group: 1
ping-check: enable
Source ip_address: 10.201.26.217
ip_address 10.201.31.237
udp_port
9995 status
up
0 times, outpkts
256
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on "i" series platforms.
774
ExtremeWare 7.5 Command Reference Guide