Download Image Hostname Filename - Extreme Networks ExtremeWare Command Reference Manual

Configuration and Image Commands

download image hostname filename

download image hostname filename {primary | secondary} [slot
<slot-id-list>]
Description
Downloads a new version of the ExtremeWare software image.
Syntax Description
primary Specifies that the new image should be stored as the primary image.
secondary Specifies that the new image should be stored as the secondary image.
slot-id-list Specifies that the new image should be stored on one or more switches in a stack. The slot ID is
the number of the switch in the stack.
Default
Stores the downloaded image in the current location (the location used for the last reboot).
Usage Guidelines
This command downloads images to the appropriate slot. If the primary or secondary information is
not given, then the image is downloaded to the applicable slots or active partition.
Use the command to find the discovered members, their operational and configured
show slot
platform-types and the ports that are active or inactive on them.
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
1108 ExtremeWare 7.5 Command Reference Guide