Enable Slb Node - Extreme Networks ExtremeWare Command Reference Manual

enable slb node

enable slb node [all | <ip address> : [ftp | http | https | imap4 | ldap |
nntp | pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or
UDP port number>]]
Description
Enables one or all nodes.
Syntax Description
all
ip address
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
Nodes are enabled by default.
Usage Guidelines
This command allows nodes to accept new connections.
To disable a node, use the following command:
disable slb node
Example
The following command enables all nodes:
enable slb node all
ExtremeWare 7.5 Command Reference Guide
Specifies all nodes.
Specifies an IP address.
Specifies an FTP node.
Specifies an HTTP node.
Specifies an HTTPS node.
Specifies an IMAP4 node.
Specifies an LDAP node.
Specifies an NNTP node.
Specifies a POP3 node.
Specifies an SMTP node.
Specifies a SOCKS node.
Specifies a telnet node.
Specifies a TFTP node.
Specifies a Web node.
Specifies any port associated with a wildcard server.
Specifies a www node
Specifies a TCP or UDP port for the node.
enable slb node
619