Create Route-Map - Extreme Networks ExtremeWare Command Reference Manual

create route-map

create route-map
create route-map <name>
Description
Creates a route map statement.
NOTE
This command is available only on the "i" series switches.
Syntax Description
name Specifies a route map name.
Default
N/A
Usage Guidelines
Route maps are a mechanism that can be used to conditionally control the redistribution of routes
between two routing domains, and to modify the routing information that is redistributed.
Route maps are used in conjunction with the match and set operations. A match operation specifies a
criteria that must be matched. A set operation specifies a change that is made to the route when the
match operation is successful.
After a route map statement has been created, you must add entries to the route map, and then add
statements to the route map entries.
Example
The following command creates a route map named bgp-out:
create route-map bgp-out
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on the "i" series platforms only.
ExtremeWare 7.5 Command Reference Guide 947