disable slb vip sticky-persistence
disable slb vip [all | <vip name>] sticky-persistence
Description
Disables sticky persistence.
Syntax Description
all
vip name
Default
Sticky persistence is disabled by default.
Usage Guidelines
Sticky persistence is available only on wildcard virtual servers; it is especially useful for cache servers.
Sticky persistence tracks destination IP addresses. When a client tries to connect to a destination IP
address, the switch directs the client to the same cache server previously used for that destination IP
address. This helps reduce the amount of duplicated content on cache servers in your network.
To enable sticky persistence, use the following command:
enable slb vip sticky-persistence
Example
The following command disables sticky persistence for the virtual server "ftp_vip":
disable slb vip ftp_vip sticky-persistence
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies all virtual servers.
Specifies a virtual server.
disable slb vip sticky-persistence
603