Extreme Networks ExtremeWare Command Reference Manual page 332

Commands for Configuring Slots and Ports on a Switch
16->QP3 17->QP3 18->QP3 19->QP3 20->QP3 21->QP3 22->QP3 23->QP3
24->QP4 25->QP4 26->QP4 27->QP4 28->QP4 29->QP4 30->QP4 31->QP4
32->QP5 33->QP5 34->QP5 35->QP5 36->QP5 37->QP5 38->QP5 39->QP5
40->QP6 41->QP6 42->QP6 43->QP6 44->QP6 45->QP6 46->QP6 47->QP6
48->QP7 49->QP7 50->QP7 51->QP7 52->QP7 53->QP7 54->QP7 55->QP7
56->QP8 57->QP8 58->QP8 59->QP8 60->QP8 61->QP8 62->QP8 63->QP8
Egress IPTOS:
802.1p Pri->IPTOS mapping:
0->00 1->08 2->16 3->24 4->32 5->40 6->48 7->56
802.1p: Disabled marking of priority field based on queue number
Smart Redundancy:
VLANs monitored for stats:
Software redundant port:
jitter-tolerance:
link filtering:
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.0 to support the
This command was modified in ExtremeWare 6.1 to support PoS modules.
This command was modified in ExtremeWare 6.2.2 to indicate disabled or enabled status.
This command was modified in Extreme Ware 7.0.1 to support the
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in Extreme Ware 7.3.0 to support port aggregate bandwidth control.
The command was modified in ExtremeWare 7.3.0 and ExtremeWare 7.3e to support the
Platform Availability
This command is available on all platforms.
332
Replacement is disabled
Enabled
disabled
enabled
isr filter = yes, middle layer filter = no
keyword.
detail
"3"
series modules.
vlan
ExtremeWare 7.5 Command Reference Guide
option.