SLB Commands—"i" Series Switches Only
Service Checking:
Displays the configured service check type.
•
ftp
•
http
•
L4-port
•
nntp
•
ping
•
pop3
•
smtp
•
telnet
IP Address
Displays the IP address of the next hop.
State
Displays the status of the next hop, either up or down.
Flow Info
Displays hardware mapping information.
Example
The following command displays the current flow redirection configuration and statistics for the flow
policy "flow1":
show flow-redirect flow1
Following is the output from this command:
Service Check Timer Settings:
Ping-check
Frequency:
TCP-Port-check Frequency:
Service-check
Frequency:
Flow IPSA Mode: Enumeration Mode
http1
Proto:tcp Dest:
Source:
Service Checking: ping
IP Address
24.3.89.145
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all "i" series platforms.
632
10
Timeout:
30
10
Timeout:
30
60
Timeout: 180
0.0.0.0/ 0
L4-Port:
0.0.0.0/ 0
State
Flow Info
Down
0000
80
Enabled: yes
# Servers Up: 0/1
ExtremeWare 7.5 Command Reference Guide