Unconfigure Transceiver-Test Threshold - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

unconfigure transceiver-test threshold

unconfigure transceiver-test threshold
Description
Returns the transceiver test threshold to the factory default of 3 errors.
NOTE
This command is available only on modular switches.
Syntax Description
The command has no arguments or variables.
Default
N/A
Usage Guidelines
Use this feature when the switch can be brought off line.
Extreme Networks does not recommend changing the default transceiver test period. The default is
adequate for most networks.
Example
The following command returns the transceiver test threshold to 3 errors:
unconfigure transceiver-test threshold
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available only on modular switches.
822 ExtremeWare 7.5 Command Reference Guide