Configure Route-Map Add Goto - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure route-map add goto

configure route-map <route_map> <seq_number> add goto <new_route_map>
Description
Configures a route map
goto
NOTE
This command is available only on the "i" series switches.
Syntax Description
route-map The name of the route map to which this statement should be added.
seq-number Specifies the sequence number of the entry in the route map to which this statement should
be added.
new-route-map The name of another route map that should be evaluated.
Default
N/A
Usage Guidelines
A route map statement is evaluated only after all
goto
Example
The following command adds a
control to transfer to route map map2:
configure route-map map1 25 add goto map2
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available only on the "i" series platforms.
880
statement to transfer evaluation to another route map.
match
statement to entry 25 in route map map1 that causes evaluation
goto
and statements have been evaluated.
set
ExtremeWare 7.5 Command Reference Guide