Configure Auth Mgmt-Access Radius - Extreme Networks ExtremeWare Command Reference Manual

configure auth mgmt-access radius

configure auth mgmt-access radius primary [<ipaddress> | <hostname>]
{secondary [<ipaddress> | hostname]}
Description
Configures authentication of management sessions for RADIUS servers.
Syntax Description
primary
secondary
ipaddress
hostname
Default
Uses RADIUS for authentication for management sessions. If RADIUS is not enabled, TACACS+ servers
are used. If neither RADIUS nor TACACS+ servers are configured, local authentication is used.
Usage Guidelines
Use this command to authenticate all the management sessions through RADIUS servers. The RADIUS
server should be configured before using this command. This command fails if the primary and
secondary RADIUS servers are not configured.
The following types of management sessions can be configured:
• Telnet
• SSH
• Console
• HTTP
If you are using RADIUS authentication servers, you should only use RADIUS accounting servers for
accounting management sessions. RADIUS authentication servers should be configured before
configuring RADIUS accounting servers for management sessions.
Example
In the following example, management sessions are configured for RADIUS:
configure auth mgmt-access radius primary 192.168.14.12 secondary 192.168.14.55
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Configures the primary RADIUS authentication server that is used for management sessions.
Configures the secondary RADIUS authentication server that is used for management sessions.
The IP address of the authentication server.
The host name of the authentication server.
configure auth mgmt-access radius
839