Configure Security-Profile Dot1X-Wpa-Timers Reauth-Period - Extreme Networks ExtremeWare Command Reference Manual

configure security-profile dot1x-wpa-timers reauth-period

configure security-profile <name> dot1x-wpa-timers reauth-period <seconds>
Description
When the network-authentication is set to dot1x, WPA or WPA2, this command configures the interval
when clients are re-authenticated.
Syntax Description
name
seconds
Default
600 seconds
Usage Guidelines
Use this command to change the re-authentication interval time values for a security profile. Change
timers only when you do not want the client to be re-authenticated frequently.
Examples
The following command sets the re-authentication interval for clients to 2 minutes:
configure security-profile open-profile dot1x-wpa-timers reauth-period 120
History
This command was first available in ExtremeWare 6.2a. It was added to the "e" series in 7.3e and to the
"i" series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
ExtremeWare 7.5 Command Reference Guide
Specifies the name of the security profile.
Specifies the interval in seconds. Valid values are between 600 and 60000. The default value
is 600 seconds.
configure security-profile dot1x-wpa-timers reauth-period
897