VLAN Commands
The following command sets up the end-station 00:00:00:00:00:02 to participate in VLAN engineering
through the ports in group 10 (ports 11 or 12) or through ports 16 or 17 (enabled for any mac-group):
configure mac-vlan add mac-address 00:00:00:00:00:02 mac-group 10 vlan engineering
History
This command was first available in ExtremeWare 6.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
364
ExtremeWare 7.5 Command Reference Guide