Extreme Networks ExtremeWare Command Reference Manual page 272

Commands for Configuring Slots and Ports on a Switch
For version 6.1:
• The parameter specifies all ports on the switch.
all
• The parameter specifies 1000 Mbps ports.
1000
Example
The following example turns autonegotiation off for port 4 (a Gigabit Ethernet port) on a stand-alone
switch:
configure ports 4 auto off duplex full
The following example turns autonegotiation off for slot 2, port 1 on a modular switch:
configure ports 2:1 auto off duplex full
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.1 to support the
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to support the
Platform Availability
This command is available on all platforms.
272
parameter.
all
and keywords.
all mgmt
ExtremeWare 7.5 Command Reference Guide