Configure Route-Map Add Set - Extreme Networks ExtremeWare Command Reference Manual

configure route-map add set

configure route-map <route-map> <seq_number> add set [as-path <as_number> |
community [[access-profile <access-profile> | <as_number>:<number> | number
<community> | no-advertise | no-export | no-export-subconfed] | remove |
[add | delete] [access-profile <access-profile> | <as no> : <number> |
number <community> | no-advertise | no-export | no-export-subconfed]] |
next-hop <ip address> | med [internal | <med_number> | remove | [add |
delete] <med_number>] local-preference <number> | weight <number> | origin
[igp | egp | incomplete] | tag <tag_number> | accounting index
<index_number> value <value_number> | cost <number> | cost-type [ase-type-1
| ase-type-2]]
Description
Configures a route map
NOTE
This command is available only on the "i" series switches.
Syntax Description
route-map
seq-number
as_number
as_access_profile
as_number:number
community
no-export
no-advertise
no-export-subconfed
remove
add | delete <as_access_profile>
add | delete
<as_number:number>
add | delete <community>
add | delete <no-export>
add | delete <no-advertise>
add | delete
<no-export-subconfed>
ExtremeWare 7.5 Command Reference Guide
entry.
set
The name of the route map to which this statement should be added.
Specifies the sequence number of the entry in the route map to which this
statement should be added.
Prepends the specified AS number to the AS path in the path attribute.
Sets the community in the path attribute to the specified access profile.
Sets the community in the path attribute to the specified BGP community
number, specified in as_number:number format, in the path attribute.
Sets the community in the path attribute to the specified BGP community
number, specified as an unsigned 32-bit integer in decimal format.
Sets the community in the path attribute to the no-export attribute.
Sets the community in the path attribute to the no-advertise attribute.
Sets the community in the path attribute to the no-export-subconfed attribute.
Removes the community attribute, if present.
Adds or deletes the specified access profile to or from the existing community
in the path attribute.
Adds or deletes the specified BGP community number, specified in
as_number:number format, to or from the existing community in the path
attribute.
Adds or deletes the specified BGP community number, specified as an
unsigned 32-bit integer in decimal format, to or from the existing community in
the path attribute.
Adds or deletes the no-export attribute to or from the existing community in
the path attribute.
Adds or deletes he no-advertise attribute to or from the existing community in
the path attribute.
Adds or deletes the no-export-subconfed attribute to or from the existing
community in the path attribute.
configure route-map add set
883