Show Mac-Lockdown-Timeout Ports - Extreme Networks ExtremeWare Command Reference Manual

show mac-lockdown-timeout ports

show mac-lockdown-timeout ports [<portlist> | all]
Description
This command shows information about the MAC address lockdown timeout feature for the specified
port or group of ports or for all ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports.
Default
N/A
Usage Guidelines
The information generated by this command includes whether or not the feature is enabled and the
timeout value set for the specified ports.
Example
The following example shows information about the MAC address lockdown timeout settings for ports
21, 22, 24, and 25.
show mac-lockdown-timeout ports 21,22,24,25
The command generates output similar to the following:
Port Mac lockdown timeout
---------------------------------------------------
21 Enabled
22 Enabled
24 Disabled
25 Disabled
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Timeout
(In secs)
2000
3000
200
15
show mac-lockdown-timeout ports
1041