Commands for Status Monitoring and Statistics
configure flowstats export delete port
configure flowstats export <group#> delete [<ipaddress> | <hostname>]
<udp_port>
Description
Removes a flow-collector device from an export group to which NetFlow datagrams are exported.
NOTE
This command is available only on the "i" series switches.
Syntax Description
group#
Specifies the export group to which the specified flow-collector device belongs. The group
number is an integer in the range of 1-32.
ipaddress
Specifies the IP address of the flow-collector destination.
hostname
Specifies the host name of the flow-collector destination.
udp_port
Specifies a UDP port of the destination flow-collector.
Default
N/A
Usage Guidelines
For the BlackDiamond Switches. See Chapter 22 for information about a similar command for the
PoS module.
Example
The following command removes the flow-collector device with IP address 10.205.30.15 using UDP port
2025 from export group 5 on this switch:
configure flowstats export 5 delete 10.205.30.15 2025
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available only on the "i" series platforms.
668
ExtremeWare 7.5 Command Reference Guide