Configure Security-Profile Wep Key Delete - Extreme Networks ExtremeWare Command Reference Manual

Version 7.5
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

Security Commands

configure security-profile wep key delete

configure security-profile <name> wep key delete [all | <integer>]
Description
Deletes the specified WEP key.
Syntax Description
name
Specifies the names of the security profile.
all
Specifies that all WEP keys are deleted.
integer
Specifies the numeric value identifying the WEP key.
Default
Zero (0).
Usage Guidelines
When you delete a WEP key whose index is the default WEP key index, the default index is changed
automatically to the lowest specified WEP key (or N/A if no WEP keys have been specified).
Configuration changes take effect immediately and are propagated to all ports sharing the named
profile. If the command fails, none of the changes is propagated to any of the ports.
Example
The following example deletes the first WEP key (0).
configure security-profile wep-secure wep key delete 0
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e and to the "i"
series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
904
ExtremeWare 7.5 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.5

Table of Contents