Commands for Status Monitoring and Statistics
show packet miscompare
show packet miscompare
Description
Captures corrupted packet data to help in troubleshooting problems.
NOTE
This command is available only on the "i" series switches.
Syntax Description
slot number
Specifies the slot where the I/O module is installed.
verbose
(Optional) Specifies detail that may interest a developer analyzing some system behavior at a
more verbose level than provided by the debug summary information.
Default
N/A
Usage Guidelines
Use this command only at the direction of Extreme Networks personnel. Extreme Networks support
personnel can capture corrupted packet data to help in troubleshooting problems using the following
command:
show packet miscompare <slot number> {verbose}
Example
The following command captures corrupted packet data for the module in slot 5:
show packet miscompare 5
History
This command was first available in ExtremeWare 7.2.0b25.
Platform Availability
This command is available on "i" series platforms.
794
{verbose}
<slot number>
ExtremeWare 7.5 Command Reference Guide