Configure Security-Profile Dot1X-Wpa-Timers Pairwise-Update-Timer - Extreme Networks ExtremeWare Command Reference Manual

Security Commands
configure security-profile dot1x-wpa-timers
pairwise-update-timer
configure security-profile <name> dot1x-wpa-timers pairwise-update-timer
<minutes>
Description
When the network-authentication is set to dot1x, WPA or WPA2, this command configures the interval
when pairwise keys for dot1x and WPA clients are updated.
Syntax Description
name Specifies the name of the security profile.
minutes Specifies the interval in minutes. Valid values are between 10 and 1440. The default value is
10 minutes.
Default
10 minutes
Usage Guidelines
Use this command to change WPA and dot1x key update time values. Change timers only when you do
not want the keys to be updated frequently.
Examples
The following example sets the interval for updating keys to 60 minutes:
configure security-profile open-profile dot1x-wpa-timers pairwise-update-timer 60
History
This command was first available in ExtremeWare 6.2a. It was added to the "e" series in 7.3e and to the
"i" series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
896 ExtremeWare 7.5 Command Reference Guide