Configure Vlan Netlogin-Lease-Timer - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure vlan netlogin-lease-timer

configure vlan <vlan name> netlogin-lease-timer <seconds>
Description
Configures the timer value returned as part of the DHCP response for clients attached to
network login-enabled ports.
Syntax Description
vlan name Specifies the VLAN to which this timer value applies.
seconds Specifies the timer value, in seconds.
Default
10 seconds
Usage Guidelines
The timer value is specified in seconds.
This command applies only to the web-based authentication mode of network login.
Example
The following command sets the timer value to 15 seconds for VLAN corp:
configure vlan corp netlogin-lease-timer 15
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e
Platform Availability
This command is available on all platforms.
930 ExtremeWare 7.5 Command Reference Guide