Create Security-Profile - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

create security-profile

create security-profile <name> {copy <existing_profile>}
Description
Creates a new security profile.
NOTE
This command is available on Summit 300 and Alpine 3800 series switches only.
Syntax Description
name Specifies the name of the security profile being created.
existing_profile Specifies the name of an existing profile from which the system copies the initial values.
Default
Unsecure profile is the default, and it is applied to all wireless ports.
Usage Guidelines
Use this command to create a new profile or to copy an existing profile using a new name.
Example
The following example creates a new security-profile called wep-secure using an existing profile called
unsecure:
create security-profile wep-secure copy unsecure
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e and to the "i"
series in 7.3.0.
Platform Availability
This command is available only on Summit 300 and Alpine 3800 series switches.
948 ExtremeWare 7.5 Command Reference Guide