Clear Netlogin State Mac-Address - Extreme Networks ExtremeWare Command Reference Manual

clear netlogin state mac-address

clear netlogin state mac-address
clear netlogin state mac-address <hex-octet>
Description
Initialize or reset the network login sessions for a specified supplicant.
Syntax Description
hex-octet Specifies the MAC address of the supplicant.
Default
N/A
Usage Guidelines
This command is essentially equivalent to a particular supplicant's logging out. The MAC address is
cleared from the FDB, the port is put back to its original VLAN (for campus mode), and the port state is
set to unauthenticated, if this was the last authenticated MAC on this port.
Example
The following example resets the network login session for the supplicant with the MAC address of
00:e0:18:01:32:1f:
clear netlogin state mac-address 00:e0:18:01:32:1f
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 831