Configure Ports Display-String - Extreme Networks ExtremeWare Command Reference Manual

configure ports display-string

configure ports [<portlist> | mgmt] display-string <alphanumeric string>
Description
Configures a user-defined string for a port or group of ports.
Syntax Description
portlist
mgmt
alphanumeric string
Default
N/A
Usage Guidelines
On a modular switch,
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
The display string can be up to 16 characters. Display strings do not need to be unique for each
port—you can assign the same string to multiple ports. For example, you could give all the ports that
connected to a particular department a common display string.
The string is displayed in certain commands such as the
Example
The following command configures the user-defined string corporate for port 1 on a stand-alone switch:
configure ports 1 display-string corporate
The following command configures the user-defined string corporate for ports 3, 4, and 5 on slot 1 on a
modular switch:
configure ports 1:3-5 display-string corporate
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to support the
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots
and ports. On a stand-alone switch, can be one or more port numbers. May be in the form
1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies the management port. Supported only for switches that provide a management
port.
Specifies a user-defined display string.
can be a list of slots and ports. On a stand-alone switch,
<portlist>
command.
show ports info
and keywords.
all mgmt
configure ports display-string
<portlist>
275