Unconfigure Ports Redundant - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

unconfigure ports redundant

unconfigure ports [<portlist> | <port id>] redundant
Description
Clears a previously configured software-controlled redundant port.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
portid Specifies a port using the display string configured for the port. Only one port can be specified using
this method.
Default
N/A
Usage Guidelines
On a modular switch,
<portlist>
can be one or more port numbers.For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
The is the display string configured for the port. Use the
<port id>
display-string <string>
The list of port numbers or the port display string specifies the redundant port(s).
Example
The following command unconfigures a software-controlled redundant port on a stand-alone switch:
unconfigure ports 5 redundant
The output of the command is similar to:
Unconfig Redundant on Port 5
* Summit400-48t:33 # 07/24/2004 04:50:36.42 <Info:SYST> serial admin: unconfigure
ports 5 redundant
The following command unconfigures a software-controlled redundant port on a modular switch:
unconfigure ports 2:3 redundant
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
356
can be a list of slots and ports. On a stand-alone switch,
command to configure a display string for the port.
<portlist>
configure ports <portnumber>
ExtremeWare 7.5 Command Reference Guide