Configure Slb Vip Service-Check Telnet - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

configure slb vip service-check telnet

configure slb vip <vip name> service-check telnet {user <user name>
password {encrypted} <password>}
Description
Configures layer 7 telnet service checking for a specific virtual server.
Syntax Description
vip name Specifies a virtual server.
user Specifies the user name that is checked.
password Specifies the password for the user name.
encrypted Encrypts the password stored in the configuration file.
Default
N/A
Usage Guidelines
This command automatically enables service checking.
If you do not enter a password, you are prompted for the password twice. Extreme Networks
recommends that you use a password.
The telnet service check provides a more thorough check than ping check, because the telnet service
check logs in to the service.
To configure the frequency and timeout of service checks, use the following command:
configure slb global service-check
To configure the global parameters, use the following command:
configure slb global telnet
Example
The following command configures the service check to login using the user name service and the
password check on the virtual server named telnetvip:
configure slb vip telnetvip service-check telnet user service password check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
570 ExtremeWare 7.5 Command Reference Guide