Security Commands
enable web http access-profile
enable web http access-profile [none | <access-profile>] port <port number>
Description
Allows HTTP access on the specified (non-default) port.
NOTE
This command is available only on the Alpine 3800 and Summit 300 series switches.
Syntax Description
none
Specifies not to use an access profile when accessing HTTP.
access-profile
Specifies the name of an access profile to use when accessing HTTP.
port number
Specifies the port number to use to access HTTP.
Default
N/A
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTP usage.
Example
The following example enables HTTP access using the access profile named open_web on port 120:
enable web http access-profile open_web port 120
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on Summit 300 and Alpine 3800 series only.
1018
ExtremeWare 7.5 Command Reference Guide