Configure Slb Gogo-Mode Ping-Check - Extreme Networks ExtremeWare Command Reference Manual

Version 7.5
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

configure slb gogo-mode ping-check

configure slb gogo-mode <port number> ping-check frequency <seconds>
timeout <seconds>
Description
Overrides the global default ping check frequency and timeout values for this GoGo mode group.
Syntax Description
port number
frequency
timeout
Default
The default frequency is 10 seconds.
The default timeout is 30 seconds.
Usage Guidelines
The frequency must be less than the timeout.
To restore a configured frequency and timeout back to the global default, specify 0 for the frequency
and timeout.
Before you use this command, configure the IP address on the GoGo mode servers using the following
command:
configure slb gogo-mode health-check
To enable ping check for a GoGo mode group, use the following command:
enable slb gogo-mode ping-check
To disable ping check for a GoGo mode group, use the following command:
disable slb gogo-mode ping-check
Example
The following command configures a GoGo mode ping check frequency of 15 seconds and a timeout of
45 seconds for the group with port 29 as the master port:
configure slb gogo-mode 29 ping-check frequency 15 timeout 45
History
This command was first available in ExtremeWare 6.1.5.
ExtremeWare 7.5 Command Reference Guide
Specifies the GoGo mode master port.
Specifies the frequency of the ping check. The range is 1 to 60 seconds.
Specifies the timeout of the ping check. The range is 1 to 60 seconds.
configure slb gogo-mode ping-check
529

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.5

Table of Contents