Configure Tacacs Server Timeout - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

configure tacacs server timeout

configure tacacs [primary |secondary] server <ipaddress>

Configures the timeout interval for TACAS+ authentication requests for the primary and secondary

This command is available only on the "i" series switches.

Syntax Description

Specifies the IP address of the primary or secondary server.

Specifies the number of seconds for authentication requests. Range is 3 to 120 seconds

The default is 3 seconds.

Usage Guidelines

This command configures the timeout interval for TACACS+ authentication requests. When the timeout

has expired, another authentication attempt will be made to the next alternative authentication method.

The following command configures the timeout interval for TACACS+ authentication to 10 seconds:

configure tacacs primary server 192.168.14.8 timeout 10

This command was first available in ExtremeWare 7.0.0.

Platform Availability

This command is available on the "i" series platforms only.

timeout <seconds>

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5