Configure Debug-Trace Isis-Snp - Extreme Networks ExtremeWare Command Reference Manual

configure debug-trace isis-snp

configure debug-trace isis-snp <level>
Description
Controls logging of debug messages related to sending and receiving, and decoding and encoding of
PSNP and CSNP Messages.
NOTE
This command is available only on the "i" series switches.
Syntax Description
debug level
Default
The default is 0.
Usage Guidelines
The
debug level
the messages recorded at lower levels.
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on"i" platforms only.
ExtremeWare 7.5 Command Reference Guide
Specifies a debug level. Following are the debug levels:
0 — Critical/Error Messages
1 — Warning Messages
2 — Concise Messages
3 — Verbose Messages
4 — Packet Dumps
range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
configure debug-trace isis-snp
1163