Show Slb Connections - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

show slb connections

show slb connections [ipaddress <ip address>: [ftp | http | https | imap4 |
ldap | nntp | pop3 | smtp | socks | telnet | tftp | web | wildcard | www |
<TCP or UDP port number>] | vip <vip name>]
Description
Displays information about current connections.
Syntax Description
ip address
vip name
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
N/A
Usage Guidelines
You can specify a client, virtual server, or node. If you do not specify a virtual server or IP address,
information on all connections is displayed. An IP address of 0.0.0.0:0 is a wildcard.
Example
The following command displays the current connection information for all connections:
show slb connections
History
This command was first available in ExtremeWare 6.1.
634
Specifies an IP address.
Specifies a virtual server.
Specifies an FTP port.
Specifies an HTTP port.
Specifies an HTTPS port.
Specifies an IMAP4 port.
Specifies an LDAP port.
Specifies an NNTP port.
Specifies a POP3 port.
Specifies an SMTP port.
Specifies a SOCKS port.
Specifies a telnet port.
Specifies a TFTP port.
Specifies a Web port.
Specifies any port associated with a wildcard server.
Specifies a www port
Specifies a TCP or UDP port.
ExtremeWare 7.5 Command Reference Guide