create slb vip
create slb vip <vip name> pool <pool name> mode [transparent | translation
| port-translation] <ip address> {- <upper range>} : <L4 port> {unit
<number>}
Description
Creates one or more new virtual servers.
Syntax Description
vip name
pool name
mode
ip address
upper range
L4 port
unit
Default
N/A
Usage Guidelines
You must create the pool before assigning a virtual server to the pool. To create a pool, use the
following command:
create slb pool
Example
The following command creates the virtual server named ftp_vip, with an IP address of 10.10.10.2 in the
pool named ftp_pool, and assigns the port-translation forwarding mode:
configure slb vip ftp_vip pool ftp_pool mode port-translation 10.10.10.2 : ftp
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies a virtual server.
Specifies a pool.
Specifies the forwarding mode.
Specifies the IP address of the virtual server.
Specifies the upper IP address for a range of IP addresses.
Specifies a port.
Specifies a unit identifier on a virtual server. The range is 1 to 16.
create slb vip
575